Overview

The cleanroom escape panel from PBSC serves as a quick and safe way to exit a cleanroom or containment-controlled environment. It is also commonly referred to as a breakout panel, service access panel, cleanroom door, escape door, BOP, or kick out panel. Additionally, it can be utilized as a removable window for equipment access routes during planned shutdowns.

The BOP, a part of PBSC’s architectural range, is designed for cleanroom use. Its flush design, minimal visible fixings, and high scratch and wear resistance make it an ideal choice.

While the unit offers low leakage rates, it is not fully airtight due to its sealed design.

The application comes with a standard rebate frame for fire doors, while custom solutions are offered for escape panel doors that open through the escape panel.

To comply with health and safety regulations in your facility, it is recommended to install break out panels.

Widely used in healthcare, medical research, and the pharmaceutical industry worldwide.

Emergency escape panels are a crucial safety feature in any facility. These panels provide a reliable means for staff to evacuate during life-threatening situations. Correct design, installation, and maintenance are essential to ensure that the panel is effective and meets regulatory requirements, thereby ensuring the safety of staff.

PBSC offers a range of door designs that can cater to your specific needs, such as:

Downloads

Datasheet

The panel is easily detached as it is clearly labeled and removed in approximately 6 seconds. This lightweight panel provides a swift escape route for personnel in case of emergency and can be reattached after removal.

 

 

 

 

 

 

PBSC offers a BOP with a PBSC flush frame that is 0.059 inches thick. You can choose between polyester powder-coated or a polished stainless-steel finish, and there are many RAL/BS colors available. The interior panel of this unit features a high-quality acrylic sheet with a rubber gasket, and you can choose between a clear or opaque finish. PBSC can customize the panel to fit a specific cleanroom requirement, including adjusting it to fit the thickness of your finished wall.

The panel is made of stainless steel and comes with pull handles. You can choose between a pull or push design, and escape from both sides is possible.

Available in either 304 or 316L stainless steel.

With a minimum rebate to the floor level of 1.259 inches.

The minimum clear opening is 2.29ft wide x 2.95ft high

The maximum unit size is 4.59ft wide x 8.20ft High.

Following on-site installation, PBSC offers a Planned Preventative Maintenance and Servicing Plan with an extensive after-sales support service, including planned preventative maintenance programs, servicing, and spare parts.

READ MORE

Features

  • Flush Wrap Around Frame – To Both Sides of the Wall for a Clean Room Finish
  • Welded and Polished Construction and Finish
  • Providing a Quick Escape
  • Stainless-Steel Assembly and Pull Handles
  • Low Leakage Rates
  • Made to Suit Finished Wall Thickness
  • Lightweight Panel
  • Custom Solutions

Applications

Providing a quick escape from a containment-controlled or cleanroom environment...

The break out panel was originally designed for personnel escape however, its wrap-around frame has become a favoured choice for accessing equipment during shutdowns in non-fire-rated walls.

PBSC’s cleanroom escape panel is designed specifically for pharmaceutical, medical research, and healthcare facilities that require containment and cleanroom standards worldwide.

Technical Specification

  • Clear Opening Minimum 700mm Wide, 900mm High
  • Maximum size of 1.4m Wide x 2.5m High
  • Structural Opening Min and Max - Dependent on in Fill Panels
  • Please contact PBSC for specific design options.
  • -
  • PBSC reserve the right to introduce changes in performance, configuration and technology, dimension, weights and materials in the course of technical progress. Images may not be accurate.
  • Some of the information/images/equipment described or shown may only be available at extra cost. Features & specifications will vary.

Options

  • Escape from Both Sides
  • Clear or Opaque Acrylic Panel
  • 304 or 316L Stainless Steel Construction
  • Powder Coated Steel in a Wide Range of RAL/BS Colours
  • Pull or Push Types Available
  • Rebate Design for Installation In Front of an External Fire Door

Downloads